Electronic door lock systems, deployed in various establishments, notably hotels, typically incorporate multiple modes of access—be it RFID (Radio Frequency Identification), keypad, biometric (fingerprint identification),
It is not unusual when you, sometimes, lock yourself out of your home or forget to lock the door to your home when in a
There will always be situations when thieves can try to break into homes. In an unfortunate case they might even try to target your home.
With the changing time people are more focused towards getting the biometric door lock for multiple reasons. If you are wondering what are the major reasons
How To Change A Front Door Lock To A Biometric Lock ?we brought you some easy-breezy DIY steps to change your front door lock to a biometric system. Just keep following, and you’ll end up having a fingerprint door lock system on your front door. So, let’s jump in:
Purchase your authentic biometric lock kit online or from any local store but make sure to opt for a trustable brand.
Drill 2 inches deep holes in the side of the door’s deadbolt. Blow on those holes to remove all the tiny wood flakes on the door. Now, drill the second hole with 2 inches deepness in the doorframe to lock the bolt into it.
Put a screwdriver into the driver-board hole and fit the deadbolt into the lock mechanism perfectly. Now, install the latch on the edge of the door. Once both latch and deadbolt are installed, hammer the metal-plates and insert screws in the holes and turn the deadbolt tight.
Put a fingerprint verification lock in place on the outside of the door and secure the backplate to hold it in place. If your kit includes a weatherproof guard, then install it on the LCD of the fingerprint scanner.
Now, the biometric pad is installed, make sure to double-check that the door generates a tight seal and re-screw if it does not. Furthermore, everything should fit perfectly to insert batteries.
Lastly, install batteries into your biometric pad according to its requirements.
Our advisors are available to help with product requirements and answer any questions, please give us a call at +86-757-28376123 to discuss your project.
We care about your questions, commentaries and any feedback you wish to communicate with us.
